30'x40'x12' Steel Garage WorkShop Building by Excel Metal Building Systems Inc. Color 80,000 psi Roof Panels(13 Colors to choose from). Color 80,000 psi Walls Panels (13 colors to choose from).
18 Overhangs on Both Gable ends and Both Sidewalls. (1) - 12'-0 x 10'-0 Sliding Door Framed Opening Sheets included (Sliding Door Hardware Not Included). (1) - 3070 Walkdoor Framed Opening (Walk door Not Included). Building Type: Excel Metal Buildings Patented RIGID CEE.
Roof Snow Load: 20 lb per sq. We recommend that you check with your local building authorities for snow and wind load requirements. Our buildings can be designed to meet your local requirements if they are different than shown in listing (Additional cost may apply).
Our engineers are licensed in all 50 states. If stamped drawings are required to obtain a building permit we are able to supply those for an additional cost. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved.Each building comes compete with construction drawings, material list and installation manual. Included with the building kit is all structural red iron engineered and cut to length, roof and wall sheeting, building trim, fasteners for roof and wall panels, fasteners for secondary members, bolts for column to rafter connection (ANCHOR BOLTS NOT INCLUDED). OPTIONS THAT MAY BE ADDED FOR ADDITIONAL COST. 4:12, 5:12 and 6:12 Roof Pitches.
4'-0 Wainscote (Different color wall panel at bottom of wall 4'-0 high). 2", 3", 4" or 6" WMP-VR Roof and Wall insulation. Please feel free to chat with us about any questions or concerns you may have prior to purchasing. At Excel we strive to be an information source for the beginner as well as the professional structural steel worker.We know that our reputation comes from you, our customers, it is our job to provide you with a quality product at an affordable price, and to provide you with the best possible service to make this a successful building venture for you. We look forward to working with you on your Metal Building project.
There are many advantages of steel vs. Using steel is very environmentally sound. Two-thirds of all steel produced today comes from recycled steel. Steel frames can last decades without needing repair or replacements, unlike wood frames. While steel typically costs more than wood, its price remains relatively consistent while the cost of wood fluctuates wildly and budgeting is more accurate with steel material.
There is less scrap and waste when using steel instead of wood. Steel is manufactured and will not have defects like the twists, knots or splits found when working with wood. Also, steel is not prone to cracking, warping or splitting like wood.
Check with your local building authorities before you start the building process to verify your code requirements, such as live load, wind loads, and building code. This is the end users or general contractors responsibility. (Example: Code IBC 2009; Live Load 20lb, Ground Snow 20lb, Wind Load 90mph).Always have everything in writing. Never take anything for granted. Structural changes cant be made easily. Moving a door may affect more on your building than you might expect. Every part of a metal building works together to make the building perform the way it is supposed to. After you have entered into a contract with a steel building company they should send you a set of approval drawings for you to check over before they start producing your building. Check for things like location of overhead doors, bay spacing, eave height, clearance issues, colors of walls, and trim. This is your building, make sure it is the way you want it. When your building arrives at the jobsite, it is very important for both parties, that you inventory the material in a timely manner.
Most companies will allow 7-10 days to inventory the material for any shortages. If something is short notify the company in writing immediately.
If you wait past the 7-10 days to claim a shortage that is on the material list most companies will not honor your claim. Don't throw the erection drawings on the dash of your truck. Just because it's a metal building they do not all go together the same way. These drawings are produced for your building only. Use them with the material list and it will make the construction of the building a much more enjoyable experience.A metal building company that cares doesn't mind answering questions that you might have. If they do, then maybe that's not the company to be doing business with. Nobody produces a building before they have an order for one. In rare cases someone may have one that has been canceled for some reason.
If this is the case the eave height is already determined, the doors are already located and colors have already been produced. So you can't pick the color of the building. We are Excel Metal Buildings. We were rewarded a U.Patent for our Do-It-Yourself Steel Garage Building Kit / Do-It-Yourself Steel Workshop Building Kit which are available from 15 wide to 40 wide up to 16 eave heights. Excel Metal Buildings is also one of the nations leading suppliers of Mini Storage Building Kits, Self Storage Building Kits and Climate Control Self Storage Buildings. The item "30'x40'x12' Steel Garage WorkShop Building by Excel Metal Building Systems Inc" is in sale since Monday, November 18, 2019. This item is in the category "Business & Industrial\Building Materials & Supplies\Modular & Pre-Fabricated Buildings". The seller is "puckedou" and is located in Baxter Springs, Kansas.
This item can be shipped to United States.