Steel Metal Building

40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture


40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture
40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture
40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture
40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture
40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture
40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture

40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture   40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture

Size: 40' Wide 60' Long 14' Tall. Ground Snow Load: 20 lbs per sq. Framing for three 10x12 overhead door openings (doors not included).

Framing for two 3x7 walk door openings (doors not included). Framing for two 3x3 window openings (windows not included). 3 insulation package for roof and walls. 10'x20' partial lean-to down one sidewall (1:12 roof pitch).

LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer's stamp and letter of designation certification are available for all 50 states. Engineered Stamped Plans are available for an added cost.

Check with your local building inspector or permit authority for specific requirements. Be sure that our building meets your local snow load and wind load requirements. If your snow load or wind load is higher than what is listed here, we can meet those requirements, but the total price of the building may increase. If building permit is required, it should be obtained prior to fabrication.

If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit. All of our buildings can also be custom designed and manufactured for your specific needs or requests.

Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans (Engineered Stamped Drawings available for additional cost).

Custom designed around your door and window size and location requirements (doors and windows not included). Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel , cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws.

Bolts and screws for the framework are supplied by us. 80,000 psi Galvalume+ , which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvanized steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost.

80,000 psi painted galvanized steel. They are comprised of a modified silicone polyester paint applied over the top of already galvanized steel panels. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched.

All panel laps are fastened with self-drilling fasteners. Roofing sidelaps receive roll mastic sealant.

Gable ends and eave of roof receive a die formed foam closure to "bird-proof" the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels.

Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. EXTRA FEATURES AND AVAILABLE OPTIONS. 18 Overhang (1 end or both).

18 Overhang (1 side or both). 3'x7' Half Glass Door (Glass not included). 3'x7' Slimline Glass Door (Glass not included). 3'x3' Horizontal Sliding Window.

6'x3' Horizontal Sliding Window. 3'x3' Vertical Sliding Window. 3'x4' Vertical Sliding Window.

We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures.

Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20' apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do. From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes "knocked down" and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates. Cost: Minimal compared to welded up I-Beam or Rigid Frames. Strength: Engineered to exceed your local design requirements for snow, wind and seismic loads.

Stamped engineered drawings available for all states. Accessories: Complete line of accessories and options. Doors - Windows - Insulation - Overhang - Wainscot - Etc. All buyers may cancel an order by giving written notice to Simpson Steel Building Company.

Pricing is subject to the availability of steel and related pricing. Simpson Steel Building Company will make every effort to mitigate the increase in cost due to steel price increases.

The item "40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture" is in sale since Monday, June 8, 2020. This item is in the category "Business & Industrial\Modular & Prefabricated Buildings". The seller is "simpsonsteelbldgs" and is located in Van Buren, Arkansas.

This item can be shipped to United States.

  1. Country/Region of Manufacture: United States
  2. Item Height: 14
  3. Item Width: 40 ft
  4. Material: Metal
  5. Type: Garage
  6. Features: Car Garage
  7. Building Type: Steel Truss Frame
  8. Building: Metal Building Kit
  9. MPN: 40x60
  10. Featured Refinements: Steel Building, Steel Building Kit, Garage, Barn
  11. Item Length: 60
  12. Brand: Simpson Steel Building
  13. Square Footage: 2400


40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture   40x60x14 Steel Building SIMPSON Garage With Partial Lean-to as shown in picture