Size: 40 Wide 75 Long 12 Tall. Ground Snow Load: 20 lbs per sq. LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS (May require additional costs). Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineers stamp and letter of designation certification are available for all 50 states and Canada.Check with your local building inspector or permit authority for specific requirements. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us at an additional charge. Fabrication should not begin until you obtain the permit. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans. Around your door and window size and location requirements (doors and windows not included).
Included in pricing are 1 walk door opening, and all overhead door openings, these include all framing and trim (doors not included). Accessories Walk doors Windows Insulation, etc. Your choice of color (13 available colors). All structural members are high strength 57,000 psi steel.
Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us. Which is a superior roofing product used throughout the metal building industry.
It is comprised of an acrylic coating applied over the top of an already galvalume steel panel. It has a shiny aluminum appearance.
Painted roof panels are available at an additional cost. 80,000 psi galvalume steel.They are comprised of a modified silicone polyester paint applied over the top of already galvalume steel panels. There are 13 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched. All panel laps are fastened with self-drilling fasteners.
Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to bird-proof the building, sealing off all openings. All buildings come completely trimmed out in color. Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option.Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. Please provide city, state and zip code during inquiry to confirm. EXTRA FEATURES AND AVAILABLE OPTIONS.
18 Overhang (1 end or both). 18 Overhang (1 side or both).3x7 Half Glass Door (Glass not included). 3x7 Slimline Glass Door (Glass not included). We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company. Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures.
In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns. The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel.Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20 apart. All other Framing on these buildings is the same as any other larger industrial/commercial building we do.
From the outside they look the same, the only difference being the truss itself. The truss takes the place of a welded up I-Beam frame. The truss comes knocked down and is easily assembled on the ground. The members bolt to 3/16 thick steel gusset plates.
Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors Windows Insulation Overhang Wainscot Etc.
The item "Steel Garage 40x75x12 SIMPSON garage storage shop metal building" is in sale since Sunday, April 8, 2018. This item is in the category "Business & Industrial\Building Materials & Supplies\Modular & Pre-Fabricated Buildings". The seller is "simpsonsteelbldgs" and is located in Van Buren, Arkansas. This item can be shipped to United States.