Add or remove any options/features, etc. PLEASE NOTE THAT THIS BUILDING IS PRICED SPECIFICALLY FOR THE FOLLOWING STATES. VA, TN, TX, KY, WV, NC, SC, GA. This particular listing is for a 24' wide x 31' long fully enclosed steel garage, carport or workshop with 10' tall side walls. This is a vertical roof style 1 car garage with.
One 10'x12' roll-up garage door and one 36"x80" walk-in door. Walk-in door can be placed where you see fit. This garage is certified for 140 MPH/ 30 PSF in. These include mobile home anchors if doing a ground install (concrete bolts already included if installing on a slab), and generic engineered drawings needed to obtain a permit. 14 Gauge 2 1/2" x 2 1/2" Steel Frame/Tubing.
Center Braces on Every Roof Bow. Rebar Anchors for Ground Installation. Concrete Bolts or Sleeve Anchors for Cement Installation. 4 Corner Braces (SOME INCLUDE EXTRA BRACING AS WELL).
Engineer Certified Units up to 170MPH /65PSF Depending on. Heavier 12 Gauge Galvanized Frame Available.12 Gauge Framing Double Leg Option. Additional Windows, Roll-Up Doors, Walk-In Doors, Panels, lean-to's, etc. Multiple Roof Styles- Regular, Boxed Eave or Vertical Style. Colored Screws AND MUCH MORE! ADVANTAGES TO HAVING YOUR BUILDING CERTIFIED. Built to Engineered Specifications to Meet Most Local Code Requirements. FL goes up to 170MPH.
Certified Anchoring Using Mobile Home Anchors (For Ground Install). INSTALLATION SURFACE AND CONCRETE SLAB.
A concrete slab is not required for most of our buildings (certain larger commercial buildings do require slab) and we can install right on the ground. Other examples of installation choices include but are not limited to. When pouring a slab please not that frame size specified in ALL of our steel structure listings is actually 1 FOOT shorter than stated roof length due to 6 overhang on both sides. In other words, if the building is 18' wide x 21' long/depth, the slab will need to be at least 18'x20'.
We REQUIRE a level surface for your building within at least 4. We can always adjust legs to be higher on one side/end if your surface is not level. If you plan on getting a permit than certification is required in order to meet the IBC code requirements.
100% FREE WITH ALL NON-COMMERCIAL BUILDINGS!! Setup is not a quick process and can take hours and sometimes days depending on size, style and features so please keep that in mind when scheduling.
WE REQUIRE A LEVEL SURFACE FOR YOUR BUILDING WITHIN 4. FAILURE TO DO SO CAN RESULT IN DELAY OF SETUP.
If we don't have listed the exact type, size, or style of building (including features) that fits your needs, we would LOVE to help you design one that works for you by creating your own CUSTOM BUILDING! PLEASE BE SURE TO READ THROUGH LISTING DESCRIPTION THOROUGHLY AS MOST OF OUR BUILDINGS ARE PRICED FOR CERTAIN STATES.... PRICES VARY IN OTHER STATES DUE TO DIFFERENT MANUFACTURERS USED AND THE SERVICE AREAS THEY COVER AS WELL AS PRICING DUE TO LOCAL BUILDING CODES AND ZONES.Thank you so much for visiting East Coast Homes! We are here to help so if you have ANY questions at all please don't hesitate to ask. The item "Steel Metal Workshop Garage Utility Shed Building Barn 24 x 31 x 10" is in sale since Tuesday, September 25, 2018. This item is in the category "Business & Industrial\Building Materials & Supplies\Modular & Pre-Fabricated Buildings".
The seller is "eastcoasthomes68" and is located in Suffolk, Virginia. This item can be shipped to United States.