SIMPSON Steel Mini Self Storage 40x60x8.5 Metal Building Prefab Structure

  

Design: Mini Self Storage Buildings. Size: 40' Wide 60' Long 8'6 Tall. Ground Snow Load: Up to 30 lbs per sq.

Wind Load: Up to 161 MPH. Roof Pitch: 0.5:12. (12) 10' Wide x 20' Deep Compartments. (12) 9' Wide x 7' Tall Roll Up Door Openings. ROLL UP DOORS NOT INCLUDED.

Full Set of Erection Drawings. Easy to Read Erection Manual.

LOADS CAN BE ADJUSTED TO MEET LOCAL CODE REQUIREMENTS. Simpson Steel Truss buildings are designed to satisfy all building code requirements. If required for obtaining a Building Permit, the appropriate state engineer's stamp and letter of designation certification are available for all 50 states.

Check with your local building inspector or permit authority for specific requirements. If building permit is required, it should be obtained prior to fabrication. If a building permit is required you will most likely need stamped engineered drawings from us. Fabrication should not begin until you obtain the permit.

Building in picture may not be the exact size of the listing, it is shown as a sample of what is possible with one of our buildings. All of our buildings are custom designed and manufactured for your specific building. Each building is designed and manufactured to your specific building. Buildings are not manufactured until the time you release us to begin fabrication. We recommend that you not release the building for fabrication until all building permits are obtained, drawings and colors are approved. All buildings come complete with an erection manual, easy to read drawings, and Anchor Bolt Plans (Engineered Stamped Drawings available for additional cost).

Around your mini self storage layout. More units and doors can be added for an additional cost. End units also can be added.

Your choice of color (15 available colors). All structural members are high strength 57,000 psi steel. Cut to length, and pre-punched for easy assembly with either 1/2 bolts or self-drilling screws. Bolts and screws for the framework are supplied by us.

Which is a superior roofing product used throughout the metal building industry. It is comprised of an acrylic coating applied over the top of an already galvanized steel panel. It has a shiny aluminum appearance. Painted roof panels are available at an additional cost. 80,000 psi painted galvanized steel.

They are comprised of a modified silicone polyester paint applied over the top of already galvanized steel panels. There are 15 standard colors. All roof and wall panels are attached with self-drilling fasteners. Wall panel fasteners are color matched.

All panel laps are fastened with self-drilling fasteners. Roofing side laps receive roll mastic sealant. Gable ends and eave of roof receive a die formed foam closure to "bird-proof" the building, sealing off all openings. All buildings come completely trimmed out in color.

Sculptured gable, eave, corner and base trim, as well as jamb and head trim are included. Gutter and downspouts are an option. Trim material is the same as wall panels. Typically your building can be delivered within 3 to 4 weeks from the time that you give us the authorization to proceed with fabrication. EXTRA FEATURES AND AVAILABLE OPTIONS.

3" or 6" Roof Insulation. Units on one side or both. We would like to take this opportunity to thank you for your interest in the pre-engineered steel building industry, and particularly for your interest in our company.

Our product line ranges from the most basic of structures, to the highest degree of design complexity. In addition to our line of Steel Truss buildings, Simpson Steel manufactures a variety of other structures. Recreational, warehousing, mini-storage, airplane hanger, and shopping mall structures. In 1993, Gregg Simpson developed and patented a steel truss design to compete with the wooden structured pole barns.

The steel truss is shaped much like a wooden truss with a bottom chord. The main exception is, that all of the members of the truss are steel. Designed to carry the same snow loads as several wooden trusses, the steel trusses can be spaced as much as 20' apart. A few years later, Gregg added mini self storage units to his portfolio and has been providing one of the highest quality and best priced prefabricated mini storage building kits on the market. All other Framing on these buildings is the same as any other larger industrial/commercial building we do.

Minimal compared to welded up I-Beam or Rigid Frames. Engineered to exceed your local design requirements for snow, wind and seismic loads. Stamped engineered drawings available for all states. Complete line of accessories and options. Doors - Windows - Insulation - Overhang - Wainscot - Etc.