Steel Building Insulation Roll Standard Reinforced Facing VRR-PLUS

  

A low cost film/film vapor retarder product with a. 02 perm (WVTR)to be used in a high humidity environment with a reinforced metal building insulation with 30 lb of tensile strength and 90 psi puncture testing consisting of polypropylene scrim film with a metalized polyester film laminated to back of the facing for reflective heat radiation. Meets many certifications and good light reflectivity also available in black color with various batt thickness for R values and roll widths. See specifications VRR plus for details. Standard Reinforced, White or Black facing.

2 R-6 (not certified)VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 ft lengths. 3 R-10 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 ft lengths. 3.5 R-11 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 lengths. 4 R-13 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 75 ft lengths.

6 R-19 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 50 ft lengths. 8.0 R-25 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 30 ft lengths. 9.25 R-30 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 25 ft lengths. Note: For 24 widths, tabs can end up being wider during fabrication than normal and may need to be trimmed during installation. The two piece system can be more diversified facing choices and the lengths you may need for the project versus the one piece 8.00 or 9.25 inch thickness.

One piece R25 and R30 is available only in the 25 ft and 30 ft maximum lengths. Standard orders come with 6 tabs on one side and white facing. Please let us know if you'd like 3 tabs on both sides or black facing instead, for no extra charge. For installation, be sure check out our. Matching Reinforced Vinyl Patch Tape.

Two-way Stick Tape for Tab Seals. Self Drilling Screws for Banding.